The pitching season for 2011 is over for the year. Between tournament pitching and design, it’s been a very productive and rewarding year. The season was ended with second places in the Maryland Singles and Maryland Doubles, topped off with a first place in the HP Pro Tour event in Frederick, Maryland for Class 2–30 feet. I also won the Maryland Points Challenge for 2011. Design wise, I completed the design of three new horseshoes which were approved by the NHPA. In addition, I completed the design of 4 additional models, all of which have been 3D printed and and sent to the foundry for prototype casting. These 4 designs are scheduled to be returned the first week of November. Each of the new designs are discussed below.
Three New Designs NHPA Approved
Three designs, two of which are part of the Tribute Series were submitted to the NHPA for approval. All three were approved by the NHPA on 10 September 2011. Testing is underway and decisions about production will be made after testing is completed. Each of the three is discussed below. Each of the horseshoes includes a Hilfling designed hook calk which is the same on both sides. This design permits a flip shoe with thumb calk up, to be turned with the thumb calk down. Click any image for a larger view.
The Aviator — is the first approved as part of the Tribute Series and is dedicated to the U.S. Air Force. It is similar in appearance to the Steinfeldt horseshoe of old. This horseshoe, like most of the Hilfling shoes is perfectly balanced. There is a shank notch to define the Center of Gravity point. The Aviator is perimeter weighted around the outer perimeter and includes the Hilfling hook calk for the flip or turn.
Aviator Top and Bottom
The Trident — The Trident is the second in the Tribute Series and is dedicated to the U.S. Navy. The Trident has a unique ringer break, is perimeter weighted, shank notched and perfectly balanced. The ringer break is designed to give the flipper the option of flipping square, open or closed. The position of the index and middle fingers will dictate which of the three choices control the flight of the horseshoe. The indentations around the ringer break fit the reverse flipper perfectly. The Hilfling hook calk is incorporated.
The Trident -- Top and Bottom
The Eagle — The Eagle is the third of the three designs approved by the NHPA. The design was an experiment in an egg-shaped shank. There is a small ringer break and an indentation to define the center of gravity on each shank. The shoe can be flipped or turned with the Hilfling calk.
The Eagle -- Top and Bottom
Four New Designs
The four designs below have all been 3D printed and shipped to the foundry for prototype casting. Candidates for NHPA approval will be submitted to the NHPA. Two of the shoes are part of the Tribute Series. The Warrior dedicated to the U.S. Marines and the Patriot dedicated to the Vietnam Veteran.
The Warrior — is dedicated to the U.S. Marine. The Warrior is perimeter weighted, balanced and can be flipped or turned. It takes advantage of the full width and height permitted for any approved horseshoe. This is a great shoe for capturing all of those important single points.
The Warrior -- Top and Bottom
The Torque — The Torque is the most unusual horseshoe I’ve designed. It is roughly based on the shape of the Aviator. It has been my observation that a shoe that arrives slightly rotated either open or closed reduces lost ringers. This shoe allows the pitcher to grip the shoe normally, but, will apply an automatic rotation depending on which side is flipped. First, it has a thumb calk on both sides. The center of gravity has been relocated to force the shoe to rotate clockwise or counter-clockwise depending on which side is flipped. Normally, causing this rotation is a function of the location of your thumb on the calk. I have found that it is easier to allow the shoe to rotate automatically without changing my thumb position on the calk. The shoe should be gripped and flipped as usual, but, it will rotate slightly prior to arriving at the stake. The pitcher decides which rotation is best to eliminate bounceback or unwanted rotation around the stake. I pitch from the right side and have found that a shoe that rotates counter-clockwise works best for me. Normally, a shoe coming in from the right will continue rotating clockwise. I find that forcing the shoe to rotate counter-clockwise reduces the amount of rotation, in sand or clay. This should help eliminate losing ringers that are pushed off backwards.
The Torque -- Top and Bottom
The Patriot — The Patriot is dedicated to the Vietnam Veteran. This is specifically a turn shoe. In addition, the thumb calk is narrower and raised to the same level as the height of the hook calks. I’ve made the shanks a bit wider at the center of gravity. I also designed this shoe to be easily changed to a flip shoe. This Patriot is designed more for the finger turner. It also works particularly well for a flip-turn as the shoe should arrive with a 3-point landing. The hook calks are with the traditional skid plates.
The Patriot -- Top and Bottom
The Gyro — The Gyro is a departure from my normal design. It is roughly designed after the Ted Allen. It is specifically a turn shoe. Again, the thumb calk is narrower and higher than traditional thumb calks. This is a turn shoe for the hand grip.
I am searching for a foundry willing to cast prototypes and production horseshoes in ductile iron. If anyone can recommend a foundry that casts ductile iron frequently, please contact me at bobrass@verizon.net . I have contacted a large number of foundries and was unable to find any that would respond to a quote to cast prototypes. I want to return to designing and casting Hilfling Horseshoes. I am ready to release a larger version of the GrabIt Medium that is perfectly balanced and weighs 2 pounds 8 ounces. Anyone who recommends a foundry that agrees to cast my prototypes and production inventory will receive a free pair of GrabIt+ as a reward. THANKS
NOTE: Bold text is relatively new as to date indicated, while light face is older from an earlier date. If you read this blog periodically, you may be looking at a “cached” older copy. To make sure you are reading the latest, simply depress your “F5” key on the top row of your keyboard and the latest copy will be presented from the web host.
To help navigate the Table of Contents, I’ve added two new links. One here and one below the NEW narrative. If you’ve already read the “NEW” introductory narrative and want to go directly to the List of Parts select ==> List of Parts
Today is December 7th, 2020. As with most of you, I’ve been riding out the pandemic with lots of deliveries and curbside pickup. I look forward to uncovering my backyard pit after receiving my vaccine shots. I’ve continued to receive requests for purchasing the different models of my designs. I discovered yesterday, that Marcellus-Metalcasters in Marcellus, Michigan still has an inventory of all of my Hilfling horseshoe designs. To order a pair of Hilfling horseshoes from their inventory, contact Marcellus-Metalcasters at 269-646-0202. Getting to their website is a little tricky, phone Marcellus for instructions. You can still reach me by phone at 410-923-2675 or via my email at bobrass@verizon.net if you have any questions about Hilfling horseshoe designs. Good Luck in 2021.
As of December 30th, 2019. It’s been almost one year since my last post. I log in frequently to monitor the removal of spam and am always happy to see that there is activity every day. As the pitching season approaches, the access increases. I do have a bit of news. I have decided to rejoin the NHPA pitching fraternity to include membership in the Maryland Charter. I recently notified the Charter Secretary that I would be rejoining to include establishing a ringer average for coming tournaments.
Last week I decided to uncover my horseshoe pit, clean off the left hand approach (roots got both rights). I will be concentrating on a stationary stance with my left foot against the 30 foot foul line. I’ve always felt that the stride and release introduced lots of faulty results. Within a couple of days I found a stance and setup that seems to work. Before I started, I went looking for my Patriots and found that I had given them all away. Since I will be using the 1-1/2 flip, I needed to find a horseshoe that had skid plates on both sides and found an old pair of Imperial Stingers. I was also missing my leather gloves that I had previously used, so, picked up a temporary glove at Walmart and ordered two pair of leather gloves from Amazon. I found my old pickup stick and was ready.
I approached everything from scratch, trying stances, strides, grips for flip, turn and flip-turn. By the end of the week, I had settled on the stationary stance from the left approach, toe in the right corner of the foul line and right toe on the right edge of approach, and the 1-1/2 flip. By weeks end I was throwing doubles consistently. But, I’ve been through this before and will need to verify with continual practice, if it’s a final choice.
To skip over the old introductory narrative and go directly to the List of Parts select ==> List of Parts
As of January 6th, 2019. There’s something magical about grabbing your horseshoes and heading to your backyard pit to try to find the tip that will improve your ringer average. Perhaps it’s a new grip change, different stance, or any other experiment with the basics. Whatever alteration you make, it is important that you keep a record of the results of any of your experimentation. Keep in mind that you cannot ignore the laws of physics regarding gravity that effects distance, height and time. A simple change in launch angle can effect all three. The higher your horseshoe goes, the farther it travels, the longer it takes to arrive, and the softer it lands, up to a launch angle of 45 degrees. (Q) Need to go a little longer? (A) Throw it a little higher. Any technique that allows the horseshoe to arrive softer is a bonus.
I continue to get questions about some aspect of what I’ve discussed in this blog and will answer any question posed. Thus, I have decided to keep this blog active through 2019. Good Luck in your search.
I regret there is nothing new on the availability of Hilfling Horseshoes. Perhaps some reseller will step up to take over the sales. If interested contact Marcellus-Metalcasters of Marcellus, Michigan as the foundry previously casting every Hilfling horseshoe and owns the molds.
To skip over the old introductory narrative and go directly to the List of Parts select ==> List of Parts
Posted July 22nd, 2018. Congratulations to Richard Knerem, Sr. for his 3rd place finish in the Elders Class of the World Tournament. Richard has been pitching the Warriors since he contacted me to design them. He had contacted me when he was informed that the model he had been pitching was no longer available. It is also sad to see that my friend and great horseshoe pitcher is not listed, nor will she ever again be listed. Vicki Kunde was so much looking forward to this year’s event until cancer struck her down very quickly. Even during her chemo she was practicing in her back yard. Rest In Peace Vicki.
Posted June 9th, 2018. Yes, I’m still around. I received an email from the NHPA that the Hilfling line of horseshoes is licensed and remains in production for 2018. Marcellus-Metalcasters of Marcellus, Michigan is the current owner of the Hilfling molds and has paid the licensing fee to the NHPA for 2018. However, there is no reseller presently listing the horseshoes. Contact the Lucky Shoe Pro Shop for the latest information.
Posted January 16th, 2018. I regret that my website http://www.hilflinghorseshoes.com is no longer. This blog will remain active. It is a chronicle of my search to improve my horseshoe pitching. I am pretty sure that most of you will have gone through your own search for answers to the art of horseshoe pitching. I will continue to pay for this website as long as I think there is something meaningful here for the inquisitive searcher. Good Luck.
Posted December 30th, the last day of 2017. I have decided to shutdown my website at http://www.hilflinghorseshoes.com effective 15 January 2018, but will keep this blog up and running for anyone interested in information about horseshoe pitching. During the past year I have monitored the activity here and decided it was worth the expense to make the information included available to anyone searching for information in all aspects of horseshoe pitching. I sincerely hope that you will find information here that will help you improve your ringer average. Don’t forget those all important points. The majority of my horseshoes are being sold by the Lucky Shoe Pro Shop at http://www.luckyshoeproshop.com Good Luck…Bob Rasmussen.
Posted September 28th. It is with extreme sadness that I must report the passing of Vicki Kunde, Maryland’s best female horseshoe pitcher and incredible ambassador touting the sport of Horseshoe Pitching. I had the incredible honor of working with Vicki as we put together Show and Tells for anyone wanting to learn more about horseshoe pitching. She was an incredible fund raiser for the charities she supported like the Amvets, Charlotte Hall, the ASPCA and others. She was also active in various positions with the American Legion Color Guard, Auxiliary and The Riders. She was also a skilled woodworker and a member of the Annapolis Wood Workers Guild. Rest in Peace Vicki.
Vicki still made time to pitch horseshoes and become the Maryland State Champion for a number of years. She was inducted into the Hall of Fame for the Maryland Horseshoe Pitching Assn. Vicki was the most excited when she was preparing for the National Horseshoe Championships and competed in every one she could. In her last tournament she came in 9th in the finals of the Class A Women’s. Even during her illness she was preparing for her next World Tournament. May you rest in peace Vicki. Maryland horseshoe tournaments will not be the same without your smile, talent and spirit of fair play.
Posted September 16th. Although I’ve not been active as a horseshoe pitcher, I’ve remained active as a designer. I was recently contacted by a couple of guys who thought they had a great idea for a new horseshoe design. They sent me a hand drawn version of their idea. They had not taken their design beyond having a working model. I suggested they consider designing the horseshoe to meet the NHPA specs for a licensed horseshoe. Further, I wanted to include the volume distribution that would insure a perfectly balanced horseshoe with Center of Gravity precisely in the center of the horseshoe. The horseshoe was completed with their design, incorporating the NHPA specs and my distribution of volume.
One decision was required to insure a properly weighted horseshoe. They needed to identify a foundry to do the casting and provide me with the weight of 1 cubic inch of cast metal. A foundry was found and the weight per cubic inch of metal was provided. The computer file was created for printing the split horseshoe mold of the top and bottom by Shapeways in ABS plastic. Shapeways quoted a 3D printing price of less than $100. Once I receive the 3D print, I will post process the prints by sealing the ABS with a special lacquer primer, and sand the splits smooth in preparation for foundry casting. It is important than any potential designer understand the unique requirements for casting a horseshoe at a foundry regarding volume to weight, eliminating all vertical edges, etc.
If you think you have a great idea for a horseshoe, contact me. I’ll let you know everything you need to know to go from idea to finished horseshoe. The horseshoe described above had to include some very unique features to go from idea to mold. Perhaps, one day your great idea will be pitched in NHPA sanctioned events. You can contact me at… bobrass at verizon dot net
Posted August 29th. Tonight is a sad night for me. I have just completed the modification of my website at http://www.hilflinghorseshoes.com to pass to Lucky Shoe Pro Shop at http://www.luckyshoeproshop.com the continuation of the sales of all of my Hilfling designs which include the GrabIt Medium, GrabIt Lite, Patriot, Patriot2 and Warrior. Lucky Shoe Pro Shop also takes phone orders at 269-501-0146. My website will continue to be online to sell copies of my book entitled, “Horseshoe Pitching With Precision”. I don’t know what pricing Lucky Shoe will decide on or what their warranty agreement will be. I still do a bit of designing for various 3D printing requirements, including new horseshoes provided the requestor pays all necessary fees. Good Luck to everyone. I hope 2018 has more participation than 2017 did. I will continue to answer any questions regarding any bit of information on this blog.
Posted April 24th. I frequently monitor the searches shown on the WordPress stats page. It gives me some idea of what pitchers are interested in. One thing I want to call to your attention is the possible difference in the designs shown throughout the blog and what is actually produced. A case in point is the Warrior that appeared in 2011. It is not the Warrior design that went into production. When I decided to create a Tribute Series for the military services and the Vietnam Veterans, I chose the names first, before I had a design. There was also a learning curve as to the shapes that could withstand the constant impact with the stake. The Trident which went into production to honor our Navy was very popular, but, had a weak point. It was decided to discontinue production until a new design became available. So, be aware that some of the designs shown throughout the blog for the Aviator, Coastie, and Ranger were cast as prototypes, but, did not pass the usage test.
The Spring/Summer pitching season is either underway or will be shortly. I am no longer pitching for a variety of reasons, but, am happy to answer any questions that may be of interest to the pitching fraternity. Good Luck.
Posted March 10th. As I mentioned below, I have been trying to come up with an aid that would help the flip pitcher keep the horseshoe oriented properly for the flip during the entire swing. This is specific to help with the flip of the GrabIt, although it works for any horseshoe. Get yourself a small box of paper drinking straws and tape one from tip to tip of the horseshoe. Practice swinging the horseshoe while keeping the straw parallel to the ground from setup to delivery. When you think it’s correct, release the horseshoe with your normal flip and see if the straw remains parallel to the ground throughout the end over end flip until it hits the ground. Try to monitor the action of your forearm and make sure there is absolutely no rotation at any point during the swing. Eventually you will get the hang of swinging your arm without rotation and watch the horseshoe flip end over end perfectly. Then you can concentrate on getting the shoe to arrive slightly open or closed to reduce the troublesome bounce backs. See image below. Good Luck.
GrabIt With Straw Attached
Posted February 20th. I periodically run through the 51 parts of this blog and verify that the links are still live. I note that the link to the Kenny Wolf website has changed. I’ve made the change in Part 4. His new link is http://kennywolf.accs.net/shoemath.htm . Secondly, I discovered that the links on my website at http://www.hilflinghorseshoes.com Design Tab were not showing the videos in Tours 1-3. Unfortunately, there has been a switch from HTML4 to HTML5 and the links to the videos are no longer valid. Efforts to resolve the problem with my template supplier has not worked thus far. So, I’ve listed all of the links covered in Tours 1-3 below found on Youtube. I’ve also included additional links to horseshoe videos also on Youtube. To my blog readers, if you find a link anywhere that is not working, please let me know.
I continue to work to find an aid that will help flip pitchers swing their arms correctly to insure a proper end over end release. This is particularly important to flip the GrabIt Medium and Lite correctly.
Posted February 6th. Yesterday I discovered that the videos I have running on my website at http://www.hilflinghorseshoes.com had a problem. The Design Tab at the top of the page normally presented 5 different videos that are no longer working. It was discovered that the shift had been made from HTML 4 to HTML 5 and the use of the Windows Media Player would no longer work. After consulting with my ISP I discovered that I could link to Youtube for the same 5 videos. So, I’m in the process of moving copies of the 5 videos to Youtube and updating the website to call the videos from my website. This is important because I had presented a variety of grips for GrabIt Medium and Lite users to help to master the flip of each horseshoe. I am also working on a gadget/gizmo to help flip pitchers flip a horseshoe properly so that it lands flat at arrival with a little modified grip that would allow the horseshoe to arrive slight closed assisting with bounce backs.
The foundry I use for casting all of my horseshoes asked me to create a cradle to allow a horseshoe to rest precisely so that the in-house CNC could smooth out the perimeters of each horseshoe. A cradle is a negative image of 1/2 of a horseshoe so that the CNC can grind only excessive metal at the parting line and leave a nice smooth edge to the horseshoe. I’ve created 4 cradles for each of my designs. This is a cradle.
Posted January 6th. A warning to cold weather pitchers. Don’t leave your horseshoes in the trunk of your car. Your horseshoes are most susceptible to breakage if you take them from a cold trunk into a warm facility. It takes time for iron to reach room temperature and it does not take place evenly from metal area to metal area within the horseshoe. The potential break points will be where thin metal meets thick area, for example the connection from shank to hook. Hairline cracks will not heal themselves once they occur. So, the actual break may take place at a later time, if not immediately. In the winter months, keep your horseshoes in your home, not in the trunk of your car.
Posted January 4th. Some great news for all future Hilfling horseshoe buyers. Effective January 1st the cost of all Hilfling horseshoes has been lowered. This is due to a reduction in shipping costs which will be passed on to the buyer. The Tribute Series horseshoes were already priced much lower than other NHPA sanctioned horseshoes, but, we continue to try to find ways to reduce pricing for all pitchers where possible. So, the lower prices reflected on the website for all horseshoes, will indicate free shipping.
Posted December 28th. I would like to wish all pitchers a Happy New Year and a successful 2017 at the pits. I am in the process of moving all of the comments up to the Table of Contents into Part 52 which I will clean up and index based on subject. I also plan to create a Part 53 that will include a pitching tip(s) regarding the pitching of the GrabIt. It will include a little gadget I have in mind that will help to insure the swing remains square from setup to release.
When I went through the testing phases of the 4 models I sent to the NHPA, I noted two mistakes made when flipping the Viking and GrabIt. First, was the tendency to put too much pressure on each horseshoe with the pad of the index finger at release. Secondly, was incorrectly rotating the forearm at some point during the delivery phase. The gizmo/gadget I have in mind will help with the monitoring of each tendency during practice.
Horseshoe pitching is only successful when supported by volunteers whether as members of the NHPA staff or individuals working at their local venues. There are many who unselfishly work without expectation of anything other than a “Thank You”. I have witnessed some of these individuals who have shown extraordinary love of the sport and sacrificed their time and energy to make horseshoe pitching a success. I would like to name a few.
Marcellus-Metalcasters, the foundry that I have used since 2008, to cast, clean, weight match, paint, wrap and box horseshoes ready for the buyer and ship out the orders. They kept my dream alive and agreed to continue sales through 2017.
To Vicki Kunde, our Maryland World Class pitcher, who is fighting a difficult battle and still planning future free clinics and attending the next NHPA World Tournament wherever it’s held. Vicki is the greatest ambassador to horseshoe pitching I’ve had the honor of working with. If you know Vicki and wish to pass on good well wishes, she can be reached via email at vlkunde at gmail dot com.
To Larry Bunn, the Maryland representative for the Baltimore NHPA facility. Larry works tirelessly to hold a first class event and makes sure that every pitcher showing up has an opportunity to pitch, even if he has to rework the entire schedule.
To Diana Ratliff of the Frederick Horseshoe Pitching Assn. Diana usually sits in a cramped, hot kitchen to set up the Frederick tournaments, complete all of the score sheets, enter and print the tournament results, and pass out the awards and trophies at the end of the day. She is generally the last to leave.
To Bob Stepp of American Legion Post 7 in Crownsville, Maryland, who has been the driving force in keeping horseshoe pitching active in the Summer and Fall since I started in 2007. He also has an incredible stat keeper.
To Dr. John Nay of Arizona who has always been my biggest supporter and horseshoe pitching booster. John was responsible for the Patriot 2, as he did not want to violate the NHPA rules by grinding off the Patriot ringer break. John was also responsible for my switch to the right foot stride which took care of my left side misses and my discussion of the square to square method. Thanks John.
Finally, to all of the volunteers who cut the grass, clean out the pit water, bring out the shovels, paint, water, and return everything after the event and in most cases, not pitching at all, while sticking around to keep score. Thanks to those that I have not mentioned that make horseshoe pitching a success.
I have decided to discontinue my effort to make all of the designs of my Tribute Series available and in production. It has become just too expensive to 3D print, cast prototypes and license them. I’ve never taken any money for the sale of my horseshoes and don’t have the funds available any longer. Sorry if you had expected the Aviator, Coastie, Ranger, Avenger and Trident remake, it’s just not feasible any longer. The existing horseshoes will continue to be produced and licensed for the foreseeable future and both the website and blog will continue.
For the majority of us, the pitching season is over until warmer weather returns. To get ready for the coming new pitching season, it is wise to keep yourself in pitching form. This includes keeping your legs, arms, shoulders and hands/fingers ready. A simple way to work the legs is by climbing steps at home. For your shoulders and arms, grab a gallon jug of water with handle and swing it back and forth 10-20 times periodically. For the hands, squeeze a tennis ball 10-20 times.
Ordinarily I don’t stray too far from horseshoe related topics, however, I feel that this is important for those of you suffering from eczema. Each winter I have a terrible time with dry skin and itching, sometimes waking me from sleep. I decided to go to a new dermatologist. He essentially said there was no cure for it, but, there were treatments. He said a cream and steroid shot would help. He indicated that the shot was good for 6 weeks. I took the shot in my hip. Two days later the itchy bumps and dry skin patches were gone. In addition, my dandruff was gone. So, if you’re suffering from this uncomfortable skin problem, ask about a cortisone shot. Hope it gives you some relief.
Posted November 7th. This has been a very busy 5 months for me, so I’ll cover what’s been happening during that time. However, I want to address a problem that I, and others have faced when moving up to 30 feet. I will preface this by referring to the November/December NHPA Newsline. The NHPA has passed a specification/requirement that by 2019, any pre-2007 venues previously sanctioned, must include at least 3 courts with 30 foot platforms whether separate, or as a continuation of the walkway between pits.
I started pitching in 2007 from 40 feet. I immediately fell in love with horseshoe pitching. A recurring knee problem and age qualified me to move up to 30 feet. I experimented with turning and flipping. It was apparent that the shorter distance made turning more difficult and flipping easier. I tried to find information on flipping. There was virtually nothing. All of the videos and writings discussed turning. There was a very limited selection of horseshoes dedicated to flipping while most were designed for turning.
The turning point for me was trying to find where to put a string over the court to designate the high point location. A vague reference was discovered that said it was 60% downrange. I was a member of the Physics forum at the time and posted an inquiry for a formula that would help me to determine the actual highpoint if I knew the actual release point. I designed a little electronic glove that turned off a bright light when I released the horseshoe. I then wrote a Perl language program that provided the results of the highpoint location when the release point was known. I was standing stationary at the time and my release point was 1-1/2 feet in front of the 27 foot foul line and 3 feet from the ground. The banner at the top of each of my parts shows the location of my highpoint. The result — no matter what distance you pitch from, the highpoint of flight of your horseshoe never reaches the halfway point from release to the stake. When I posted this information, I was immediately challenged. I needed to create a video, now on Youtube, that shows the highpoint as not reaching halfway. This is how this blog started in 2008.
Posted August 30th. It’s been a while since my last posting. This has been a very difficult pitching season for me as I was advised in February not too pitch during the hot summer months. Thus, I limited myself to my evening Legion sand league. I hope to pitch in the final NHPA tournament scheduled in October. It was during my sand league pitching that a horseshoe designed specifically for sand was in order. I was losing way too many ringers that were knocked off by the arriving shoe. The arriving shoe was spinning around to the backside and pushed backwards off as a ringer and sometimes off as a point. Below is a version of a horseshoe specifically for sand. If you look at the bottom or underside you will notice a rail that runs from the hook caulk towards the back of the horseshoe. The rail on the hooks will cut a groove in the sand that the shank rail should fill. The two plus signs on either side of the ringer break should help anchor the horseshoe more firmly in place. This is a preliminary design and may change as time passes.
Sand Shoe Top
Sand Shoe Bottom
Posted June 30th. Yesterday, I received some very disappointing news from the president of the Maryland Horseshoe Pitchers Assn., indicating there would be no Maryland State Doubles Tournament this year due to lack of volunteers. Frankly, I’m not surprised as I see the participation in sanctioned tournaments and informal leagues dropping significantly. I had not mentioned this before because it is a personal medical issue. However, I had to make the difficult decision to not pitch any tournaments during the hot summer months. Frankly, it is very stressful to pitch 6-8 cancellation matches during the hottest part of a hot summer day for an Elder pitcher. So, I’ve limited myself to my three evening count all Legion league matches (hopefully temporarily).
I received an inquiry about the determination of the high point of flight, so, I just decided to put out a list of all of my videos on Youtube. So, here they are.
Posted June 22nd. I have made a few changes in the blog for Part 3, regarding horseshoes. I provided a link to check the list of sanctioned horseshoes on the NHPA website. I also added a few minor additions.
I continue to pitch extremely well with the method described below for May 31st and June 2nd with matches of 57, 65 and 79 in my Monday night sand league. The method described almost eliminates the angle between your eyes and Line of Flight and virtually eliminates misses to the left of the stake. It is up to you, the pitcher, to find the proper placement and angles of your feet to allow you to rotate your shoulders counter-clockwise until they stop, with your non-pitching arm behind your back, so that the center of gravity of your horseshoe is directly over the Line of Flight, when resting against your leg. Depending on how your head is tilted, your Visual Alignment Point (VAP) should be the right edge of the distant stake at address and could be up to 2″ to the right of the stake.
When I’m pitching from the left approach my toes are along the right edge of the approach, my VAP is 2″ right. On the right approach with my heels along the left edge, my VAP is the left edge of the stake. It will be your feet, their placement and angle, that determines if your shoulders get aligned properly to place your horseshoes center of gravity over the Line of Flight. In either case, your stride forward should follow the edge of the approach to the foul line. The decision about which approach to pitch from has more to do with the quality of the approaches.
I know this sounds goofy to some, but, throughout this blog you will find many references about taming your shoulder rotation. We are almost programmed from birth to rotate our shoulders as we walk. Unfortunately, that tendency will creep into our stride and swing as we pitch horseshoes. It not only causes misses left, but, misses right depending on where you release the horseshoe when pitching with a tilted arc. Locking your shoulders into place will eliminate your inborn tendency. Practice this technique a little before you try it in competition. You will more than likely get a few questions.
Posted June 19th. With the high temperatures being reported in the mid west, I thought it was the best time to add to Part 38 “Emergency Pit 11”. If you’ve read this part, you will know that the emergency was mine. What I have discovered recently is that my situation was a life threatening one. I should have called 911 immediately. Why? What I didn’t mention at the time was that I threw up what appeared to me as coffee grounds. They were not coffee grounds, but, “blood clots”, a sure sign of heat stroke. So, don’t make the same stupid mistake that I made. If you ever see coffee grounds, call 911 immediately. It may save your life. I was lucky.
Posted on June 11th. Reference my posts for May 31st and June 2nd below. Since using the method described on those dates I have had some incredible results in my Monday night Legion league. One problem is, there are no permanent approaches for 30 foot pitchers and to make matters worse, the left approach on the assigned court has a huge root that occupies the entire approach on one pit. I needed to move to the right approach, probably both ends. I drove down to the courts this afternoon to find a solution. I decided to setup along the left edge of the right approach, right heel at 36″, left heel at 23″. I chose to use the single flip with my Visual Alignment Point with the left shank on the top of the stake. I threw 6 doubles before I bounced one back. I threw 4 more doubles, added some sand, smoothed the pit and went home. I’m looking forward to Monday night. If you’re having directional problems, give this technique a try.
Posted June 8th. For those not aware. When someone orders a pair of horseshoes through my website at http://www.hilflinghorseshoes.com I follow up with a Thank You email and a copy of my book “Horseshoe Pitching With Precision” in a linked Table of Contents and in color as a PDF file. I figure you’ve paid $27.00 for a pair of NHPA approved horseshoes and received a $20 bonus book. So, if you’ve been considering a pair of horseshoes and the book, order the horseshoes and you’ll get the book free.
Posted June 4th. I am now using the WordPress stats package to display the activity on this blog on a daily basis. I have noted an increased interest in Part 28 pertaining to the “Tribute Series”. I need to completely rewrite this Part to bring it up to date. Since I published this part in March of 2011 the design, 3D printing, foundry casting and NHPA licensing has changed. It has been a learning process. Before I am finished, I hope to have the Tribute Series finished and in production. Hindering this process is the cost of 3D printing (2 copies), web hosting fees and NHPA licensing. On average, it costs about $700 to get a horseshoe into production. Funds permitted, I hope to have all 6 horseshoes in production. However, their final design is still pending.
Posted on June 2nd. I am adding a bit of clarification to the comment for May 31st. The key to this technique is the ability to rotate your shoulders to a position that places your shoulders and horseshoe perpendicular to the Line of Flight (LOF) when it stops rotating, (note LOF cord in images below). This position must apply when you have fully rotated your shoulders and facing the stake. My left foot placed 23″ from the foul line and in front of my right foot satisfied this requirement. Moving your left foot forward or back will allow you to find this perpendicular position. So, 23″ may not be right for you. During practice yesterday, I switched to a lighter pair of Patriots to gain about 3″ at arrival. However, the technique continues to deliver the horseshoe directly at the stake.
Posted on May 31st. Throughout this blog I have discussed frequently, how your natural tendencies will creep into your pitching when you least expect it. The one most troublesome is the natural rotation of your shoulders towards our striding foot when stepping forward. The length of your stride determines just how much. Of course, it’s not troublesome when you’re walking as it helps to maintain your balance. I will describe a technique that you can use for both practice and competition. I intend to post some photos later today, when my camera charges.
This technique will work for you whether an angle or square to square pitcher. If you are an angle pitcher your angles are reduced the closer your shoulder gets to the adjacent stake. So, my feet are setup along the right edge of the left approach. My right toe is 36″ from the foul line and my left toe is 23″ from the foul line. My stride forward will take me along the edge of the approach to within 3″ of the foul line. See photos below.
Right Edge Setup
Right Edge Stride
After you have taken your stance place your left arm behind yourself and along the small of your back with or without horseshoe and/or pickup stick. Having the horseshoe behind your back should not interfere with your delivery. Next, rotate your shoulders around counter-clockwise until you can’t rotate further. You should be looking directly at the stake. You will notice a little tension in the small of your back and your right butt. Shift a little weight rightward so that your head is a bit closer to the adjacent stake. Rest the horseshoe against your right leg. Swing up to your address position so that your Visual Alignment Point is on the right edge of the stake. Swing straight back to your normal Back Swing Stop Point ticking your pant leg as it passes your leg. Begin your forward swing in sync with your stride forward. Make sure that your shoulders are locked into position throughout the stride and release. Fine tune your setup or stride until every horseshoe goes directly at the stake. Your arm should be fully extended from setup to delivery.
I have been practicing this method for the past week and every horseshoe goes directly at the stake when my stride follows the edge of the approach. Be careful if you have any back problems. Good Luck
Posted May 29th. As I have mentioned before, I monitor each days stats provided by WordPress to identify those parts most accessed. I have noticed a recurring interest in the 1-1/2 flip. There are 3 basic reasons I switched to the 1-1/2 flip. First, it keeps my arm closer to my body, thus, eliminating the angle between my shoulder and center of gravity of the horseshoe. Secondly, and just as important, is the elimination of the normal pinch grip of the single flip. Finally, it places the swing weight of the horseshoe further from your grip and pressure against the single index finger, thumb and middle finger of the grip. This feedback gives you a more accurate response for your release point.
If you want to try this style of grip and release, you must use a horseshoe that has the appropriate hook shape and is well balanced. The Snyder EZ Flip is a perfect candidate for this style of grip and release. The photos within this blog show my grip with this horseshoe. I personally use the Patriot as my choice for obvious reasons. I do add a little additional grip strength by rotating my horseshoe clockwise a little at address which rotates my right elbow closer to my body.
The key to this method is to keep the horseshoe perfectly square throughout the setup, address, swing and release. At address, the horseshoes rests against my leg and perpendicular to the Line of Flight and does not change through the release. Since the majority of the weight of the horseshoe is farther from your grip, you will need very little flip action to get the horseshoe to flip 1-1/2 times. From experience, your normal tendency is to over rotate multiple times. Use a nice gentle action by flipping with the wrist in the thumb up position. This is a different flip action. It is actually a more natural flip action with the thumb moving vertically upward. If you find your pinch grip is causing you to release too early on occasion, give the 1-1/2 flip a try. Make sure the horseshoe you’re using has the appropriate hook shape.
Posted May 26th. I have added a note to Part 2 referencing my switch to blue clay from kitty litter later described in Part 16. I personally find blue clay easier to work with over sand for several reasons. First, I do not turn my clay. When I quit for the day, I use a flat bladed shovel and level the surface by filling any depressions. Secondly, I punch 2-3″ holes over the needed locations with a pitchfork. I then sprinkle the surface making sure the holes are filled with water. I cover the clay with a damp rug. I cover the entire pit with a waterproof tarp. The whole process takes about 5 minutes. My clay surface is 4″ above ground which avoids rain from washing debris into the pit. When selecting my pit location, I wanted the ground to be slightly downhill to permit my approaches to be level with the clay surface which is 4″ above ground. For practice purposes, I only have a single pit.
Posted May 19th. I have received word from the foundry that they will be closed for vacation between June 4th through June 14th. Please factor that in should you contemplate ordering horseshoes from Hilfling Horseshoes prior to the Worlds in July. I will also post the same information on the Hilfling Horseshoes website http://www.hilflinghorseshoes.com later today.
Posted April 30th. I am posting a reference to a paper written sometime back that describes my current method as “My Better Way”, URL https://app.box.com/s/h84jw77pfb1zbour84yg . I have made a change to the method I use from my address position. I have oft stated the following — “Don’t move it unless you have to, but, if you have to, as little as necessary.” During my practice sessions this Spring, I became aware that I was swinging offline during my backswing. How? By placing my tamper on the Line of Flight cord behind me. I was swinging outside the line causing the horseshoe to arrive left of the stake. After experimenting a bit, I found I really didn’t need to swing all the way up to parallel to the ground at address.
I started using what I would refer to as a “forward press” in golf. Just a short movement to begin the process of swinging back. From my stationary stance position described in the paper referenced above from my setup position, I swing my arm/horseshoe 6″ forward (that’s right, 6 inches) down the Line of Flight. My eyes are locked on the stake. I immediately begin the backswing to my normal Backswing Stop Point. The results were immediate. The horseshoe headed at the stake, perfectly on line. At first, arriving a little short. A little more upright in my setup cured the problem. For me personally, it resolved a problem that causes me to become distracted during pitching, i.e., activity behind the distant pit. Give it a try. You may find that you’re using more arm swing than necessary.
Posted April 28th. One of the most important aspects of successful horseshoe pitching is “muscle memory”. This URL http://www.menshealth.co.uk/building-muscle/what-is-muscle-memory offers an excellent explanation of muscle memory and how long it takes to develop and rejuvenate. During the years 2000-2010 I was a “gym rat” and had the opportunity to workout at a gym owned by Kevin Levrone who placed second to Ronnie Coleman in the 2002 Mr. Olympia competition. Kevin was a strong believer in muscle memory. When not training for competition he had a walk around weight at about 185-200 pounds. When he began training for competition he would bulk up to 250-260 pounds of solid muscle in a couple of months with a body fat index of about 5%.
When we stop pitching horseshoes during the winter months, our muscle memory wanes. So, it is important that during your non-pitching time, you maintain your muscle memory so you’re ready to go, when the season begins. What muscles are we talking about? They are the 4 muscles that support your pitching shoulder and work with your rotator cuff. The best that I have found to maintain those muscles is a kettlebell. They are very inexpensive and come in multiple weights. Depending on your shoulder strength, I would recommend a 5-10 pound kettlebell with a nice grip to practice your turn or flip. Simply swing up and back with a fully extended arm and periodically stop in the up position and back position for a couple of seconds. Do what you can do comfortably, but pay attention to your normal form. It you are a turn pitcher, you might want to substitute a regular weightlifting plate that you can grip and rotate your forearms as you would for turning the horseshoe. During your normal practice sessions, swinging your kettlebell 15-20 times will warm up your shoulder muscles before starting. Come the pitching season you will be amazed at how quickly you’ll be back in the groove. Good Luck.
Posted April 15th. I frequently monitor the statistics showing the searches by each visitor and have noted a large number of visits to Part 3 which describes horseshoes and links to a number of sellers. I also mention Ebay as a source. I would like to call your attention to the fact that only horseshoes approved by the NHPA can be pitched in sanctioned NHPA tournaments. In addition to the list of approved horseshoes, there are over 100, the production status is also included. Once a horseshoe is licensed and approved for pitching you are entitled to continue to pitch shoes that are no longer in production. Please refer to the list of approved horseshoes at the following URL, http://www.horseshoepitching.com/products/sanctionedshoes.html . Even if you pitch a horseshoe on the approved list, they may be disqualified if the design has been altered over the original, whether through use or man made changes.
A horseshoe may be welded as long as the original design is not altered. For licensing purposes, the opening between hooks cannot exceed 3-1/2 inches when measured 3/4 inches from the tip of the horseshoe. Used shoes can measure 1/8″ wider. So, if you intend on pitching in sanctioned NHPA tournaments, make sure your horseshoes are licensed and sanctioned and conform to the original design of the horseshoe. Be careful when buying used horseshoes from others or online. We, as designers, must insure that the horseshoe correctly conforms to NHPA specifications regarding weight (<=2 pounds 10 ounces), width (<=7-1/4″), length (<=7-5/8″), thickness (<=1″ laying flat), and opening (<=3-1/2″ measured 3/4″ from the tips). I see a lot of used horseshoes that would not conform to the maximum of an opening of <=3-5/8″ permitted for used horseshoes. NOTE: the symbols “<=” means less than or equal too.
You certainly don’t want to show up at a tournament site and find out that your horseshoes do not qualify for sanctioned tournament pitching. If you have any questions about the rules and/or specifications of sanctioned horseshoes, please contact me or refer to the specifications provided by the NHPA at http://www.horseshoepitching.com/rules/Specifications.html .
As of April 7th. I would like to take a little time, as the Summer pitching season rapidly approaches, to discuss an important aspect of horseshoe pitching. It is what I call “Synchronized Impetus”. The dictionary provides an appropriate definition for “impetus” as “the force or energy with which a body moves”. It is very difficult to stand fixed and pitch a horseshoe from the approach to the stake with any hope of accuracy. Anyone trying to use the stationary stance realizes how much easier it is, when adding the impetus supplied by the body moving forward with the stride. However, to use the impetus effectively, it must be synchronized properly. I believe that the key to accuracy is to have the body in a stable and balanced position at the time of release. It is easiest when the stride and arm swing are timed properly. If you move too fast to the foul line, you will have to slow down you arm swing to keep from overthrowing the stake. Or, if you move to slowly, you’ll have to speed up the arm swing.
The better you synchronize your stride with your release the easier it is to cover the distance with the minimum of effort and under control. I suggest you try to first make your backswing equal to your forward swing and stride by using a little mental cadence. The slower the better. Try to get your foot planted a split second before you release the horseshoe. You may find that you synchronize easiest if you swing up and continue the downswing without stopping. Or, you may want to start your downswing with a slow bow at the waist at the speed you want to time your downswing, the slower the better. Or, you may want to start your stride forward and arm swing as soon as your arm swing stops on the backswing. Make sure you get your foot planted a split second before your release. You might want to add the ability to balance yourself on your striding foot at release.
Once you establish a smooth, fluid, synchronized swing and stride, the more accurate you will become.
Written on April 6th. What are two 2 most common reasons for missing? It is my belief that they are tendencies and angles.
On April 6th, I have added the image of the setup in the center of the court to demonstrate that the centered setup is identical to the rotated setup on the left approach. Even though the cords and body alignment are angled on the approach, they are still square to square relative to the Line of Flight. See below.
TENDENCIES — are those body movements you’ve incorporated during your lifetime. Virtually all of the throwing activities incorporate a rotation of the shoulders. Consider throwing a baseball, bowling ball, football, basketball, etc., all are movements that cause the shoulders to rotate clockwise and counter-clockwise. Even the act of walking causes a rotation of the shoulders toward the opposite leg. It is difficult to learn to quiet these normal tendencies and keep them quiet. Unfortunately, it’s when you least expect it, you’ll give the horseshoe a little extra effort and rotate your shoulders one way or the other. It usually results in a miss to one side or the other when released at the distant stake.
ANGLES — Unless you are a square to square pitcher, you will always deal with angles from either approach to the stake. To make matters worse, the angles change as you make your stride on either approach. Just as important is the angle between your eyes and pitching shoulder.
Last month I described the square to square method with a stride with the right foot. I know it’s difficult to make that change. However, it definitely upsets the normal tendency to rotate your shoulders toward the left foot. As a matter of fact, it causes the opposite rotation toward the right foot and reduces the added angle when striding.
During the next couple of nights I’ll describe a square to square method that utilizes a somewhat normal left foot stride for the right hand pitcher. To use this method, as with the previous square to square method, you’ll need to measure the distance from your nose or adam’s apple to the outside of your right shoulder. This method will use the pendulum swing with your hips and shoulders perpendicular to the Line of Flight (LOF) from setup to release. The LOF is a straight line below the Center of Gravity of the horseshoe to the stake.
There may be a little confusion about the images below and the obvious appearance of the cords running at a slight angle across the approach. It is really an optical illusion in the sense that it really is a square to square technique. The image below is the square alignment when moved into the center of the approach. I have simply rotated the entire centered setup to the left and over the approach. The key is that the shoulders are square to the eye line and the Line of Flight. Below is the square to square setup positioned in the center of the court. Note that the setup and alignment on the approach is identical to the centered setup.
Square To Square Centered in the Court
The two diagrams below describe the differences in setup between the two square to square methods.
NOTE: Click any image or photo for a larger view, or to enlarge the photo to read the narrative embedded on each photo.
Square to Square Left Approach
SqToSq Alternative Footwork
The following photos are photos of the method in process. The first two photos are of the method using a normal stride with my feet moving straight down the eye line which is 9.5″ to the left of the Line of Flight. The distance from my nose to shoulder is 9.5″.
SquareToSquareSetup#1
SquareToSquareStride#2
The next photo is the use of the square to square method using the stationary stance. Note that the stride position and stationary position are virtually identical. This is a very stable stance for the stationary stance. My eyes are looking down the sight line throughout the entire swing and release.
Sq To Sq Stationary Stance
The next two photos are what I see when using the square to square method either with a stride or stationary.
Square To Square Secondary Stake
Early in November I emailed the NHPA Secretary to get a preliminary review of the Avenger as a sanctioned horseshoe. Based upon the image provided (image below), the NHPA could see no reason not to approve the Avenger. So, what I wanted to make available for learning the various flips and turns, could become another sanctioned model. The notches shown on the Avenger below are spaced similar to a pistol grip at 1/2 inch increments. It is very easy to grip this shoe precisely each time. The horseshoe will be in the 2 pounds 8 ounce medium category and will be perfectly balanced as with all of the Hilfling horseshoes. It also incorporates symmetrical hooks for flip or turn from either side. So, for those pitchers interested in trying the turn or improving their turn, it provides lots of options.
As of October 25th. I have added two additional tips for Part 51. One deals with an easy way to monitor body alignment on the approach and the other suggests you consider reducing your backswing based on picking a shorter address alignment position based on my belief that extremely long back swings tend to pull the body out of alignment and result in missed ringers. I am considering production of a new horseshoe that I had created earlier that I referred to as my “Dial-A-Grip”. It is actually named the “Avenger”. It is a fantastic shoe for learning the turn. See below.
The Avenger
I realized recently that this blog chronicles my “Search” going into the 8th year. I monitor the hits on this blog with a product called “Statcounter”. It shows me statistics on searches, time looking, which parts, geographical location of searcher, etc. There is no personal information captured, so I don’t know anything about the searcher such as, style of pitching, i.e., flip or turn or variations, distance pitched, horseshoes used, etc. Knowing what I know now, I would have ordered the Table of Contents from current to past.
This blog covers thousands of hours of practice, testing, thinking I had found the answer and realizing I hadn’t. I am always afraid that the searcher will start with Part 1, when I want them to start where I ended up, rather than where I began. So, I’ve decided to write Part 52, which is where I am today and why. I will place Part 52 at the beginning of the Table of Contents, so that anyone researching, will know what ended up working for me and why. More important, is instant realization of why I missed, if I did, and the ability to fix it. Part 4, has always been my guiding goal and it is where I am today. Constants are the key. Using the stationary stance in the 2015 Maryland State Singles helped me win second place in the Elders Class A division.
For anyone interested there are a couple of free documents that may be of interest. The URL to the free PDF copy to everyone of “Down The Line” and “My Better Way” is https://app.box.com/s/h84jw77pfb1zbour84yg
This blog, The Search For My Perfect Swing, is directed to the new horseshoe pitcher, like me, who is interested in joining the large population of pitchers wanting to improve their technique. I guess I can state that I’m no longer new horseshoe pitcher. Here it is a few days from 2017 and I began this blog in 2008. Even though it is primarily directed at the Elder pitcher, those 70 and older, in addition to women, and youth who primarily flip the horseshoe, there should be some tidbits of information that might help any pitcher improve their ringer average. Golfers have a huge inventory of teaching aids available to help with their game. The horseshoe pitcher has very few. This blog covers my search to improve my game. Along the way I have tried to create aids that will help my technique.
Horseshoes My Way 